Pomos – Manetas

Palm grip B1

The palm grip B1 has different equipment options for many requirements.
It is compatible with our multi-axis controller or mounted on hydraulic drives.
The palm grip has a highly flexible cable (4 respectively 8×0,25qmm, 450mm long).
The mounting piece can be supplied with a tapped hole M10 (standard) or M8.

Technical data
Operating temperature            -40°C til + 60°C
Degree of protection                IP54
Contact complement                (* 1,5A 24V DC13)

Palm grip B10

The palm grip B10 has different equipment options for many requirements.
It is compatible with our double-handle controller or mounted on hydraulic drives.
The palm grip has a highly flexible single wire (0,1qmm, 450mm long).
The mounting piece for the drive rod can be supplied with a tapped hole 10mm.

Technical data
Operating temperature                      -40°C til +60°C
Degree of protection                          IP65
Contact complement                         1,5A 24V DC13 (* 0,1A 24V DC13)

Palm grip B14/B15

The palm grip B14/B15 has different equipment options for many requirements.
It is compatible with our multi-axis and single-axis controller or mounted on hydraulic drives.
The palm grip has a highly flexible single wire (0,1qmm, 450mm long).
The mounting piece for the drive rod can be supplied with a tapped hole 12mm
(standard) or 10mm.

Technical data
Operation temperature                   -40°C til +60°C
Degree of protection                       IP65
Contact complement                       0,1A 24V DC13

Palm grip B2

The palm grip B2 has different equipment options for many requirements.
It is compatible with our multi-axis controller or mounted on hydraulic drives.
The palm grip has a highly flexible cable (8×0,25qmm, 450mm long).
He can be tilted in any direction by 20 degrees and can lock in this position.
The mounting piece can be supplied with a tapped hole M10 (standard) or M8.

Technical data
Operating temperature                -40°C til +60°C
Degree of protection                    IP54
Contact complement                    1,5A 24V DC13 (* 0,1A 24V DC13)

Palm grip B20

The palm grip B20 has different equipment options for many requirements.
It is compatible with our multi-axis controller or mounted on hydraulic drives.
The palm grip has a highly flexible single wire (0,1qmm, 450mm long).
The mounting piece for the drive rod can be supplied with a tapped hole 12mm.

Technical data
Operating temperature                 -40°C til +60°C
Degree of protection                     IP 65
Contact complement                     1,5A 24V DC13 (* 0,1A 24V DC13)

Palm grip B22

The palm grip B22 has different equipment options for many requirements.
It is compatible with our multi-axis controller or mounted on hydraulic drives.
The palm grip has a highly flexible single wire (0,1qmm, 450mm long).
The mounting piece for the drive rod can be supplied with a tapped hole 7mm.

Technical data
Operating temperature               -40°C til +60°C
Degree of protection                   IP65
Contact complement                   1,5 24V DC13 (* 0,1A 24V DC13)

Palm grip B23

The palm grip B23 has different equipment options for many requirements.
It is compatible with our multi-axis controller or mounted on hydraulic drives.
The palm grip has a highly flexible single wire (0,1qmm, 450mm long).
The mounting piece for the drive rod can be supplied with a tapped hole 12mm (standard) or 10mm.

Technical data
Operating temperature                 -40°C til +60°C
Degree of protection                     IP65
Contact complement                     1,5A 24V DC13 (* 0,1A 24V DC13)

Palm grip B24

The palm grip B24 has different equipment options for many requirements.
It is compatible with our multi-axis controller or mounted on hydraulic drives.
The superior grip surface is framed by an illuminated colored ring element.
The palm grip has a highly flexible single wire (0,1qmm, 450mm long).
The mounting piece for the drive rod can be supplied with a tapped hole 12mm (standard) or 10mm.

Technical data
Operating temperature               -40°C til +60°C
Degree of protection                   IP54
Contact complement                   1,5A 24V DC13 (* 0,1A 24V DC13)

Palm grip B25

The palm grip B25 has different equipment options for many requirements.
It is compatible with our multi-axis controller or mounted on hydraulic drives.
The palm grip has a highly flexible single wire (0,1qmm, 450mm long).
The mounting piece for the drive rod can be supplied with a tapped hole 12mm (standard) or 10mm.

Technical data
Operating temperature               -40°C til +60°C
Degree of protection                   IP65
Contact complement                   1,5A 24V DC 13 (* 0,1A 24V DC13)

Palm grip B28

The palm grip B28 has different equipment options for many requirements.
It is compatible with our multi-axis and single-axis controller or mounted on hydraulic drives.
The palm grip has a highly flexible single wire (0,1qmm, 450mm long).
The mounting piece for the drive rod can be supplied with a tapped hole 10mm (standard).

Technical data 
Operating temperature               -40°C til +60°C
Degree of protection                   IP54

Palm grip B29

The palm grip B29 has different equipment options for many requirements.
It is compatible with our multi-axis and single-axis controller or mounted on hydraulic drives.
The palm grip has a highly flexible single wire (0,1qmm, 450mm long).
The mounting piece for the drive rod can be supplied with a tapped hole 12mm (standard) or 10mm.

Technical data
Operating temperature               -40°C til +60°C
Degree of protection                   IP65
Contact complement                   0,1A 24V DC13

Palm grip B3

The palm grip B3 has different equipment options for many requirements.
It is compatible with our multi-axis controller or mounted on hydraulic drives.
The palm grip has a highly flexible single wire (0,1qmm, 450mm long).
The mounting piece can be supplied with a tapped hole 12mm (standard) or 10mm.

Technical data
Operating temperature            -40°C to +60°C
Degree of protection               IP65
Contact complement               1,5A 24V DC13 (* 0,1A 24V DC13)

Palm grip B5

The palm grip B5 has different equipment options for many requirements.
It is compatible with our multi-axis controller or mounted on hydraulic drives.
The palm grip has a highly flexible single wire (4 respectively 8×0,25qmm, 450mm long).
The mounting piece can be supplied with a tapped hole M10 (standard) or M8.

Technical data
Operating temperature            -40°C til +60°C
Degree of protection                IP54
Contact complement                3A 24V DC13 (* 1,5A 24V DC13)

Palm grip B6

The palm grip B6 has different equipment options for many requirements.
It is compatible with our multi-axis controller or mounted on hydraulic drives.
The palm grip has a highly flexible cable (4 respectively 8×0,25qmm, 450mm long).
The mounting piece can be supplied with a tapped hole M10 (standard) or M8.

Technical data
Operating temperature                -40°C til +60°C
Degree of protection                    IP54
Contact complement                    1,5A 24V DC13

Palm grip B7 / B8

The palm grip B7 / B8 has different equipment options for many requirements.
It is compatible with our multi-axis controller or mounted on hydraulic drives.
The palm grip has a highly flexible single wire (0,1qmm, 450mm long).
The mounting piece for the drive rod can be supplied with a tapped hole 12mm  (standard) or 10mm.

Technical data
Operating temperature                 -40°C til +60°C
Degree of protection                     IP65
Contact complement                     1,5A 24V DC13 (* 0,1A 24V DC13)

Palm grip B9

The palm grip B9 has different equipment options for many requirements.
It is compatible with our multi-axis controller or mounted on hydraulic drives.
The palm grip has a highly flexible single wire (0,1qmm, 450mm long).
The mounting piece for the drive rod can be supplied with a tapped hole 12mm (standard) or 10mm.

Technical data
Operating temperature            -40°C to +60°C
Degree of protection                IP65
Contact complement                1,5A 24V DC13